
Terasun TSM — Cement board for renovation
🔨 Cement board for renovation
Cement Board for Renovation and Refurbishment Projects
In facade refurbishment, the primary constraint is often structural capacity of the existing building. At 9.96 kg/m² at 12 mm, Terasun TSM imposes significantly less dead load than natural stone, terracotta, or ceramic tile alternatives — making it viable for facade upgrades where the original structure cannot carry heavier cladding.
Application
Lightweight cement board for renovation and refurbishment projects — facade upgrade, wet room retrofit, and fire-rated partition upgrade.
| Board | Terasun TSM · 8–18 mm |
| Standard | EN 12467 |
| Fire class | A1 |
| Moisture category | Category A — EN 12467 |
| Substructure | Steel or aluminium rail system |
| Air cavity | Min. 40 mm (drained & ventilated) |
| ETA | ETA 24/0895 |
| CE marking | CE 1023-CPR-1565 P |
Source: ETA 24/0895 · DoP TRS-20250610F · CE 1023-CPR-1565 P · EN 12467
Renovation application benefits
Low weight — 9.96 kg/m² at 12 mm reduces dead load on existing structures
Available in thinner profiles for renovation where height and clearance matter
Suitable over existing concrete, masonry, and stable substrates
EPD and CE documentation for sustainable renovation certification
Fire upgrade — tested assembly achieves E 120 / EI 90 / EW 120
BREEAM and LEED credits available via EPD-IES-0018268
For wet room renovations over existing substrates, Terasun TSM can be applied over concrete, masonry, or other stable substrates using tile adhesive or mechanical fixing. The slim board profile (6 mm available for renovation) minimises door clearance reduction and maintains existing floor levels.
Downloads for this System
4 documents · 0 available immediately
Installation Manual
Facade System Guide
Cutting & Fixing Guide
European Technical Assessment